Pages

▼

Sunday, March 17, 2013

2008-2012 Chevy Malibu RAP wire.

You can normally find the Retained Accessory Power wire for the seventh generation Chevy Malibu's in the driver kick.
Chevy Malibu Car Audio

Chevy Malibu Car Audio
Just remove the driver kick panel and open the loomed wires coming out of the driver door. It should be a heavier gauge wire around 14 gauge (Yellow). You can use this wire to trigger amps, stereos, sat. radios, hands free systems, relays ect...
-Jeremy's Car Audio Tips
at

5 comments:

  1. UnknownApril 9, 2013 at 9:15 AM

    I think you can also grab it at the fuse box in the center console. It too is the yellow wire for window RAP.

    ReplyDelete
    Replies
    1. JTVApril 12, 2013 at 10:16 PM

      Thanks for the comment and the tip! It's greatly appreciated!

      Delete
  2. UnknownAugust 29, 2013 at 12:34 AM

    Hello, I wanted to install the ghost/shadow/logo lights on a 2010 Malibu. Normally I would just splice them into the courtesy lights that's on the door but the Malibu doesn't come wit any lights on the door. My question is does anyone know how which wire behind the door panel would be the door trigger and if it's negative or positive. Thanks

    ReplyDelete
    Replies
    1. AnonymousMarch 28, 2015 at 3:56 PM

      did you ever find an answer to this question? i am also trying to do the same thing.

      Delete
  3. AnonymousDecember 16, 2015 at 8:10 PM

    Looking to do the same thing myself. It wouldn't be an issue if the wire tunnel from the door was ran wire but its a plug so hiding the wires i that are not possible and im trying to do it as professional as possible. if anyone knows a better way coul you email me at frdranger25401@aol.com

    ReplyDelete